DIGIMATIC DML4W Capacitance Level Control
The Digimatic DML4W is a fixed point capacitive level control suitable for detecting liquids, powders & granular solids.
Ideal for use in non-hazardous applications.
Automatic high/low level calibration with full manual override. LED display shows calibration & run mode readings.
110/230 Vac/24 Vdc supply connections in same unit. Volt free, change over relay output. Power shield compensator, prevents false signalling due to material build-up on probe rod. Adjustable timer to prevent false signalling from ‘splashing’ materials. Available with long or short power shield or flush probe mounting options. Simple calibration (Various length probe available). Mounting flange available as an option.
DIGIMATIC DML4W Capacitance Level Control
Gallery
To purchase this item please contact the 4B Group
Visit 4B Group
Visit 4B Group
Downloads
You may also like...
Data/Specifications
| Supply | 110/230V ac, 24V dc in same unit |
| Load | 1.5A max, 50Ma dc |
| Ambient Temperature | -20°C to +50°C |
| Output | SPCO relay rated @ 2.5A 240V ac non-inductive |
| Output Mode | Switch selectable for normally ON (high level) or normally OFF (low level |
| Calibration | Membrane pushbuttons with LED display Automatic calibration with full manual override |
| Indication | Digital display for calibration & run mode settings, plus Power, Timer & Output LED's |
| Mounting | 1" BSP Male Mounting flange available as option |
| Protection | IP65 |
| Compensator | Powershield compensates for material build-up between probe & vessel wall (earth.ground). Prevents false signalling. Ideal for sticky or viscous materials |
| Weight | DML4W - 2Kg |
| Options/Types | Standard: DML4W Short Powershield: DML4S plus rods (see below) Flush Mounting: DML4F |
| Probes/Rods/Options | Probe Rods 100mm x 22mm dia. - 822-006 200mm x 16mm dia. - 822-005 1000mm (1mtr) x 16mm dia. - 822-003 2000mm (2mtr) x 16mm dia. - 822-004 10mtr S/S wire rope & weight assembly - 823-004 (1mtr rod , 2mtr rod & 10mtr wire rope assembly can all be cut to suitable length on site) Ancilliary Parts 1" bsp probe mounting flange Probe Mounting Flange 98mm dia, - Polypropylene, consists of 4 x 9mm mounting holes on 127 PCD, 1" BSP fitting for probe unit |
Dimensions
DML4W Dimensions
Probe Rod options
Connections
DML4W Connections
