OPTIBEAM 18mm dia. photoelectric Sensors
The Optibeam range are a low cost range of 18mm sensors in through beam, non-polarised retro-reflex and reflex formats. These units provide a very cost effective solution to a wide range of different applications throughout industry. Ideal for object detection on conveyors etc. 10-30V dc operation with transistor output. Reflector supplied where required.
OPTIBEAM 18mm dia. Sensors
Gallery
Downloads
You may also like...
Data/Specifications
| Supply | 10-30V dc | |||
| Output | Fully protected, opto-isolated transitor. Rated @ 100mA 30V dc max | |||
| Output Mode | Normally energised (ON), or normally de-energised (OFF) by linking a wire to either + or - supply connection | |||
| Indication | Output state LED | |||
| Ambient Temperature | -10°C to +50°C | |||
| Connection | 2 meter, PVC sheathed. Unscreened | |||
| Operating Range | Dependant upon type, see chart below | |||
| Sensitivity | 0-100% on Receiver, Reflex & Retro reflex models | |||
| SELECTION CHART | ||||
| PRN1M | Type: Reflex | Output: npn | Weight: 100g | Range: 0.4M |
| PRP1M | Type: Reflex | Output: pnp | Weight: 100g | Range: 0.4M |
| PDN1M | Type: Retro reflex | Output: npn | Weight: 100g | Range: 2.0M |
| PTP1M | Type: Receiver | Output: pnp | Weight: 100g | Range: 8.0M |
| PL1M | Type: Emitter | No Output | Weight: 100g | Use with PTP1M |
Dimensions
Connections
