30mm Capacitive/Capacitance Proximity SensorATEX EN 60079/IECEx 60079(Dust zone20/Gas zone0)

30mm Capacitive or capacitance Proximity Sensor EN 60079/IEC 60079 (Dust zone20/Gas zone0)
An innovative range of 30mm capacitive (capacitance) proximity sensors, designed & manufactured by SYNATEL available as 5 wire Relay output or 2 wire FET output, multivoltage units. Non flush. ATEX EN60079 & IECEx IEC 60079 gas & dust hazard area use approvals. Ideal for level detection in small hoppers, etc.
CX1TRAI – 5 wire SPCO relay output rated @ 60V 3A non-inductive. 15-240V dc/24-240V ac supplies.
CX1TZAI – 2 Wire FET output. 24-240V ac/dc supplies, 100mA max non-inductive.
Output state and sensitivity are user selectable/programmable on all sensors, using ‘CalMag‘ programmer CMP2 (supplied).

	Cx1TRAI 5 Wire relay Output	CX1TZAI 2 wire FET Output
Supply	15-240V dc/24-240V ac	24-240V ac/dc
Fusing	1500A capable, 500mA max 1 per sensor MUST be used	1500A capable, 500mA max 1 per sensor MUST be used
Programming	Performed using a combination of 2 magnets (supplied in a housing and refered to as 'CALMAG' programmer). Some programming functions require both magnets to be in place, other functions only require 1 magnet	Performed using a combination of 2 magnets (supplied in a housing and refered to as 'CALMAG' programmer). Some programming functions require both magnets to be in place, other functions only require 1 magnet
Output	SPCO Relay	2 wire FET
Output State	User selectable with 'CALMAG programmer supplied	User selectable with 'CALMAG programmer supplied
Output Rating	60V 3A max. non-inductive	100mA max
Operating Range	2mm-50mm in 10 increments User selectable using 'CALMAG' programmer	2mm-50mm in 10 increments User selectable using 'CALMAG' programmer
Ambient Temperature	-15°C to +50°C	-15°C to +50°C
IP Rating	IP66	IP66
Enclosure	Nylon 66/6	Nylon 66/6
Connections	5 core, PVC, un-screened	2 core, PVC, un-screened
Weight	260g	260g
Options	BAS3 - protective pocket. Ideal where material is abrasive, insulates sensor from actual material being detected.	BAS3 - protective pocket. Ideal where material is abrasive, insulates sensor from actual material being detected.
Approval	II 1G Ex ma IIC T4 Ga II 1D Ex ma IIIC T200110°C Da Tamb = -15°C to +50°C IP66 (Dust zone 20/Gas zone 0) (1GD)	II 1G Ex ma IIC T4 Ga II 1D Ex ma IIIC T200110°C Da Tamb = -15°C to +50°C IP66 (Dust zone 20/Gas zone 0) (1GD)

Cx1TRAI
5 Wire relay Output

CX1TZAI
2 wire FET Output

Supply

15-240V dc/24-240V ac

24-240V ac/dc

Fusing

1500A capable, 500mA max
1 per sensor MUST be used

Programming

Performed using a combination of 2 magnets
(supplied in a housing and refered to as 'CALMAG' programmer).
Some programming functions require both magnets to be in place,
other functions only require 1 magnet

Output

SPCO Relay

2 wire FET

Output State

User selectable with 'CALMAG
programmer supplied

Output Rating

60V 3A max. non-inductive

100mA max

Operating Range

2mm-50mm in 10 increments
User selectable using 'CALMAG' programmer

Ambient Temperature

-15°C to +50°C

IP Rating

IP66

Enclosure

Nylon 66/6

Connections

5 core, PVC, un-screened

2 core, PVC, un-screened

Weight

260g

Options

BAS3 - protective pocket.
Ideal where material is abrasive,
insulates sensor from actual material being detected.

Approval

II 1G Ex ma IIC T4 Ga

II 1D Ex ma IIIC T200110°C Da
Tamb = -15°C to +50°C IP66
(Dust zone 20/Gas zone 0) (1GD)

II 1G Ex ma IIC T4 Ga

II 1D Ex ma IIIC T200110°C Da
Tamb = -15°C to +50°C IP66
(Dust zone 20/Gas zone 0) (1GD)